Wygląda na to, że używasz przeglądarki, która nie obsługuje obecnych standardów wyświetlania treści w sieci. Może to spowodować, że niektóre części strony internetowej nie będą działać poprawnie. Zalecamy zaktualizowanie przeglądarki lub pobranie takiej, która spełnia obecne standardy.

Aktualizuj

Ustawienia plików cookie

Pliki cookie to niewielkie pliki przeglądarki, które pozwalają nam tymczasowo przechowywać informacje o Twoim urządzeniu oraz o Tobie jako użytkowniku wyłącznie podczas przeglądania strony internetowej LICON. Pliki te pomagają nam uzyskać informacje o ruchu i zachowaniach użytkowników, na podstawie których stale ulepszamy stronę internetową.

Powrót do listy

Grilles - Wood

Wooden grilles are manufactured using natural wood – beech, oak and mahogany. Wooden grilles are suitable for rooms with laminate or solid wood flooring.

For wooden roll-up models, each slat is connected by springs and spacers. Roll-up wooden grilles are supplied without surface treatment. Where lacquered wooden grilles are
required, each slat is impregnated with semi-glass colourless alkyd urethane varnish, designed to give a durable gloss coating of wood and exterior wooden fittings.

Grilles are manufactured from natural materials and as such minor variations in colour are inevitable, inevitable as well as dimensional changes caused by ambient temperature and humidity fluctuation.

Drevene mrizky - profil

Roll-up model
Drevene mrizky - rolovaci provedeni_1 Drevene mrizky - rolovaci provedeni_1 (1)
info  Grilles are manufactured from natural materials and as such minor variations in colour are inevitable.
info The grille can be rolled up for easier handling. 
info  Mahogany grilles are available on special request. Prices and delivery times are specified on request.
Measurements
Code PM-xx/14 PM-xx/16 PM-xx/20 PM-xx/26 PM-xx/32 PM-xx/34 PM-xx/40
Width - nett [mm] 128 148 188 248 308 328 388
Tolerance +0–1.5 mm. Code width is derived from trench heater width.
Grille airflow
alu wood steel stainless Thin  Cross
63% 55% 60% 60% 63% 58%
Load bearing capacity

EN_PM-kapacita

info In load-bearing capacity testing, grille slats are placed on two supports and weighed down in the center.
For wooden slats, values are given up to the fracture point of the first fibre. Metal slats are measured up to the point of irreversible deflection.


​Assembly instructions KORAFLEX PM

Decorative frames are available as standard in aluminium with silver, dark bronze or light bronze elox finishes. Frames may also be lacquered (powder coated) using colours from the RAL colour chart. Frames are in every case supplied as a component of trench heaters, and the type required must be specified when ordering in the Order Code. Where trench heaters are finished with a hem, the hem is of the same material as the casing.
U-frame - standard
F-frame - optional
Ramecek U Ramecek F

ORDERING CODES

Example of ordering code: PM-100/26-B040

Floor grille, length 100 cm, width 26 cm, aluminium, silver elox, roll-up, for single trench heater without alteration. Grille measurement given in the order code corresponds with the measurement of the respective trench heater. Nett dimension of the grille is available upon request.

Floor
Grille
 
Length/Width (cm)
 
Grille material
Grille Colour
Spacer type
Grille ending type
P
M
-
100/26
-
B
0
4
0
 
 
 
 
 
 
B beech
D oak
M mahagony (dark spacers only)
 
0 natural
1 lacquered
 
4 light
2 dark (only mahagony)

 
0 grille for single trench heater
1 grille for trench heater with lowered face - input side
2 grille for trench heater with lowered face - opposite input side
3 grille for trench heater with both sides lowered

Skontaktuj się z nami

W celu uzyskania dodatkowych informacji prosimy o kontakt

Przesyłając formularz, wyrażasz zgodę na przetwarzanie danych osobowych.